Pro-Finished135+ HP OutboardsAlpha or Bravo One sterndrivesMercury RacingStainless Steel4 Blade PropHub Kit NOT includedRight-Hand Rotation
The Mercury Racing Pro-Finish Bravo 1 LT Propeller is designed specifically for high horsepower, single engine outboard powered by boats and multi-species hulls under heavy loads.
The hand-crafted, stainless steel Bravo 1 LT props are designed to improve planing and trim response throughout the engine operating rpm range. The result? An increase in top-end speed by 1 to 1.5 mph.
The Bravo 1 LT features the Mercury-patented Performance Vent System (PVS). PVS enables operators to dial-in their propeller for peak planing performance. The PVS system works in concert with the LT's robust blades that are hand blended and balanced by our propeller lab artisans.
A majority of Mercury Verado and Mercury Pro FourStroke applications will use the Bravo 1 LT with all four vent holes plugged with solid PVS fittings. OptiMax 2-stroke applications require all four vent holes to be open. Upgrades from the Bravo 1 FS to the Bravo 1 LT require no change in pitch size when matching engine rpm.
The four blades offer staying on plane during slow turns, great rough water handling, excellent mid-range acceleration and the longer exhaust tube can provide added bow and stern lift or improved top ends speeds all features geared toward heavy and fully loaded walleye, bass, and flats boats.
Pitch selection: if running a 19-inch pitch 3-blade Tempest move one-inch pitch higher to 20 inch pitch Bravo 1 LT. If replacing the Revolution 4 or standard Bravo 1 move up 2-inch of pitch.
Hub Kit sold separately:
A46 - 835257K6
Flo-Torq II for use with surfacing propeller application such as Tempest, Trophy, Fury, Rev 4 and Bravo 1
A65 - 840389K06
1 1/4" propshaft application for XZ/XR sterndrives